Formwork block HB 20

110

concrete requirement I/m2

14

Concrete thickness (cm)

blocco hb 20 4

7

block weight (KG)

3

Block wall thickness (cm)

Description

The Isotex HB 20 wood-cement formwork block is suitable for the construction of internal load-bearing walls. This particular block has a total thickness of 20 cm, maintaining a concrete thickness of 14 cm. The block has the exclusive features of the entire Isotex products range. The wood is mineralised with a natural mineral that makes it inert, therefore resistant to fire, parasites and atmospheric agents.

The massive structure of Isotex blocks and floors, combined with the use of structural concrete, favours excellent acoustic insulation both from aircraft noise and from footfalls. All Isotex products are made using top-quality materials: 100% recycled fir wood, cement, iron oxide, and water, resulting in healthy products with no additives or chemical substances.

Sustainability certification:

  • Green building ANAB/ICEA
  • Environmental Declaration of Type III Products (EPD/FDES)
  • Indoor Air Comfort gold label for very low VOC emissions

Specifications

Indicative permissible flow rate (t/m) RcK - 30 N/mm2 interp. h = 3.00 m

Thermal transmittance U of the plastered wall including boundaries W/m2 K of wall. 3D method *

Thermal transmittance U of the plastered wall including boundaries W/m2 K of wall. 2D method **

Periodic thermal transmittance YIE [W/m2K] [W/m2K]

Acoustic insulation ** (dB)

Concrete volume requirement l/m2

110

Weight of the blocks Kg/m2

56

Weight of the single block (without concrete) Kg

7

Weight of the wall filled with non-plastered CONCRETE Kg/m2

310

Concrete thickness (cm)

14

Block wall thickness (cm)

3

Block size (cm)

50x25x20

REI Class fire resistance

Polystyrene, graphite, cork thickness (cm)

* The calculation of thermal transmittance has been performed according to the criteria of standards UNI 10355 and UNI EN ISO 6946, using a three-dimensional finite element calculation application validated according to EN 10211/1 and on the basis of thermal conductivity data obtained from experimental evidence.
**Indicative two-dimensional calculation according to standards UNI-TS 13788, UNI 10355 and UNI 10351.
*** Note: The test certificates can be requested from ISOTEX or consulted on the WEBSITE. The tests were field tests in which the data was elaborated according to the indications provided by technical standards UNI EN ISO 140 and UNI EN ISO 717.
****Tests performed in the laboratory according to standards UNI EN ISO 140-3:2006 and UNI EN ISO 717-1:2007.
*****Tests performed in the laboratory according to standards UNI EN ISO 10140-2:2010 and UNI EN ISO 717-1:2007.

In reference to the type of material purchased, the company will provide EC Declaration of Performance (DOP).

Video gallery

Isotex Academy – construction details
Video installation of blocks and floors
Videos of building sites and references

Related products

blocco hb 44 15 2 2

Formwork block HB 44/15-2

blocco hb 30 19

Formwork block HB 30/19

blocco 25 16

Formwork block HB 25/16

Specifications

External and internal load-bearing walls made with Isotex® structural wood cement blocks in a H formation, with a density of 534 ±10% kg/m³ laid dry, staggered by half a block, casting every 5-6 rows, with a single connecting hollow for the concrete.