Make a 3/4-way node

3/4 way joint

For 3/4 joints, lay the blocks from the inner wall to the outer one, creating at the point of contact of the outer wall an opening to allow accommodation and connection of horizontal reinforcing and passage of the concrete. The use of brackets used with more traditional blocks is to be avoided because with the ISOTEX system the connection at three or four-way joint nodes is realized by steel reinforcing rods and concrete

nodo 3 4 vie

For more specific information on laying the blocks, see the reference sections:

Instructions

Detail 30/7

Instructions

Detail 38/14

Instructions

Make a 3/4-way node

Instructions

Detail 33/10

Instructions

Detail 44/20

Instructions

Door and window lintel construction

Instructions

Floor panel beam detail

Instructions

Balcony detail

Instructions

Special eaves and chases

Specifications

External and internal load-bearing walls made with Isotex® structural wood cement blocks in a H formation, with a density of 534 ±10% kg/m³ laid dry, staggered by half a block, casting every 5-6 rows, with a single connecting hollow for the concrete.