Instructions for corner HDIII 44/20
In the corners made with 44-cm blocks, 31-cm PASSs should be used, which are placed on the 44-cm UNI side to bring the module to 25 cm; on the 50-cm UNI side and after placing the 31-cm PASS on the 44-cm side, continue with the 50-cm block length. For the next course, the UNI block should be turned over and laid crosswise to the course below. 31 cm PASS block packages have green straps.
For the next layer, the block UNI must be overturned and placed crosswise to the layer below. The indicated reinforcing is a suggestion only. Please refer to plans adequately prepared by the structure designer for the specific situation.
