Instructions for corner HDIII 33/10

The same procedure applies as for the 30 cm blocks. The PASS block is 42 cm (33 + 42 = 75 cm).
Next, in the two directions of the wall, NS blocks of length 50 cm are laid. In the next course, the UNI block is placed so as to cross and tie the corner well, repeating the operation as above (42 cm block in the direction of the 33 cm thickness of the UNI block).

Before the UNI blocks are placed, an opening must be created on the inside (similar to the bezel size of regular blocks) to allow the horizontal reinforcement and concrete to be connected. The 42-cm PASS parcels have green straps.