Instructions for corner HDIII 38/14
In the corners made with 38-cm blocks, 37-cm PASS should be used, which are placed on the side of the 38-cm UNI to bring the module to 25 cm (38 + 37 = 75 cm); then, in the two directions of the wall, NS Blocks of length 50 cm are laid. For the next course, the UNI block should be turned over and laid crosswise to the course below. In the construction of the corners with 25 cm thick blocks, it is not necessary to use PASS blocks because the module always remains 25 cm (25+50=75 cm). 37 cm PASS block packages have green straps.
For the next layer, the block UNI must be overturned and placed crosswise to the layer below. The indicated reinforcing is a suggestion only. Please refer to plans adequately prepared by the structure designer for the specific situation.
